Table 4 AWWA C207-07 Class E Hub Flanges Manufacturer & Exporter

Table 4 AWWA C207-07 Class E Hub Flanges

Manufacturers and Suppliers of AWWA C207-074 Class E Hub Flanges in Various types of Material Grades. Stainless Steel AWWA C207-074 Class E Hub Flange, Hastelloy E Hub Flange, Monel AWWA C207-074 Class E Hub Flange, AWWA C207-074 Class E Inconel Hub Flange, AWWA C207-074 Class E Hub Flange, Duplex Steel AWWA C207-074 Class E Hub Flange, AWWA C207-074 Class E Incoloy Hub Flange, Alloy 20 AWWA C207-074 Class E Hub Flange.

Werner Flanges Inc. is a well-known distributing unit of Table 4 AWWA C207-07 Class E Hub Flanges, which will resist some neutral or reducing acids at low to moderate concentrations and temperatures. Time and temperature combinations for Stainless Steel AWWA C207-074 Class E Hub Flange to the right of the curve shave less than of impact toughness. Meanwhile, the curves of Hastelloy E Hub Flange correspond to an ambient temperature and impact toughness. Molybdenum in Monel AWWA C207-074 Class E Hub Flange increases pitting resistance in halides or other species that may affect the steel’s corrosion potential.

The high chromium content of this AWWA C207-074 Class E Inconel Hub Flange produces good resistance to nitric acid, and to a lot of organic acids and caustic solutions. The specific performance of this AWWA C207-074 Class E Hub Flange will depend on the kind and effect of minor additional chemical species. The advantage of this Duplex Steel AWWA C207-074 Class E Hub Flange in a complex, mildly – reducing acid with many minor chemical species is illustrated with two phosphoric acid solutions.

Because it is substantially better in this situation, AWWA C207-074 Class E Incoloy Hub Flange is a good candidate for wet process phosphoric acid applications. The formation of precipitates can embrittlement this Alloy 20 AWWA C207-074 Class E Hub Flange, reducing its ambient temperature ductility and toughness, and can decrease its corrosion resistance.

Specification

Nominal Pipe Size	Outside Diameter (A)	Thickness (T)	Overall Thickness (L)	Hub Diameter (E)	Inside Diameter (B)	Approximate Weight (lbs)	Number of Bolt Holes	Diameter of Bolt Holes
4	9.00	0.938	1.312	5.312	4.57	13	8	0.750
5	10.00	0.938	1.438	6.438	5.66	15	8	0.875
6	11.00	1.000	1.562	7.562	6.72	19	8	0.875
8	13.50	1.125	1.750	9.688	8.72	30	8	0.875
10	16.00	1.188	1.938	12.000	10.88	43	12	1.000
12	19.00	1.250	2.188	14.375	12.88	64	12	1.000
14	21.00	1.375	2.250	15.750	14.19	85	12	1.125
16	23.50	1.438	2.500	18.000	16.19	98	16	1.125
18	25.00	1.562	2.688	19.875	18.19	120	16	1.250
20	27.50	1.688	2.875	22.000	20.19	155	20	1.250
22	29.50	1.812	3.125	24.000	22.19	190	20	1.375
24	32.00	1.875	3.250	26.125	24.19	210	20	1.375
26	34.25	2.000	3.375	28.500	26.19	235	24	1.375
28	36.50	2.062	3.438	30.750	28.19	270	28	1.375
30	38.75	2.125	3.500	32.750	30.19	305	28	1.375
32	41.75	2.250	3.625	35.000	32.19	375	28	1.625
34	43.75	2.312	3.688	37.000	34.19	400	32	1.625
36	46.00	2.375	3.750	39.250	36.19	450	32	1.625
38	48.75	2.375	3.750	41.750	38.19	530	32	1.625
40	50.75	2.500	3.875	43.750	40.19	570	36	1.625
42	53.00	2.625	4.000	46.000	42.19	650	36	1.625
44	55.25	2.625	4.000	48.000	44.19	690	40	1.625
46	57.25	2.688	4.062	50.000	46.19	730	40	1.625
48	59.50	2.750	4.125	52.250	48.19	800	44	1.625
50	61.75	2.750	4.125	54.250	50.19	830	44	1.875
52	64.00	2.875	4.250	56.500	52.19	920	44	1.875
54	66.25	3.000	4.375	58.750	54.19	1025	44	1.875
60	73.00	3.125	4.500	65.250	60.19	1250	52	1.875
66	80.00	3.375	4.875	71.500	66.19	1625	52	1.875
72	86.50	3.500	5.000	78.500	72.19	1925	60	1.875
78	93.00	3.875	5.375	84.500	78.19	2525	64	2.125
84	99.75	3.875	5.375	90.500	84.19	2600	64	2.125
90	106.50	4.250	5.750	96.750	90.19	3150	68	2.438
96	113.25	4.250	5.750	102.750	96.19	3275	68	2.438