API 6A/6B Flanges
Manufacturers and Suppliers of API 6A/6B Flanges in Various types of Material Grades., Buy Api 6a Flanges, 6BX Weld Neck Flange, Api 5l Grade B Flanges, Api Flanges Material, API 6A TYPE 6B At Factory Price In India, Manufacturer Of API 6A Slip On Flange, We Maintain Carbon Steel API 6A Flanges Good Quality.
Werner Flanges Inc. is a known exporting unit of API 6A / 6B Flanges, which still enjoy substantial application in desalination, offshore oil/gas and power industries. Buy API 6A Flanges, as it consists of only one phase as the copper nickel binary system exhibits complete solid solubility. 6BX Weld Neck Flange is often used in Condenser Plates, Weld Torch Tips, Condensers, Heat Exchanger Tubes, Evaporator Tubes, and more. These API 5l Grade B Flanges are also used in Valve Bodies, Pressure Vessels, Pump Impellers for Oil Refining, Distiller Tubes, Ferrules, Evaporators, etc. In Marine industries, our API Flanges Material are often used for Boat Hulls, Salt Water Pipe Fittings, Tube Sheet for Salt Water Service, and so on.
We are a known Manufacturer of API 6A Slip On Flange, which are as well used in Salt Water Piling Wrap, Salt Water Piping Systems, Hot Water Tanks, etc. We Maintain Carbon Steel API 6A Flanges Good Quality, which are generally used in Propeller Sleeves, Salt Water Baffles, Ship Hulls, and Water Hoses. We are offering API 6A TYPE 6B at Factory Price in India, as it is very much easy to bend and has very high corrosion resistance, but there is concern about its low corrosion – fatigue strength.
As Manufacturers and Suppliers of API 6A / 6B Flanges in Various types of Material Grades, it displays corrosion resistance similar to copper, higher general strength and better fatigue strength.
Werner Flanges Inc. one of the most appreciated organization of manufacturing API 6A/6B Flanges. High pressure steel flange, forged flanges, API 6A Type 6BX 10000 PSI Blind & Weld Neck Flanges Stockholders. API 6A Type 6BX 10000 PSI Blind / Welding Neck Flange — API 6A Type 6BX 15000 PSI Blind / Welding Neck Flange.
Specification 6A/6B Flanges
| Specification : | API 6A Flanges |
| Coating Flange Faces : | Oil Black Paint, Yellow Transparent, Anti-rust Paint, Zinc Plated, Cold and Hot Dip Galvanized |
| Size Chart : | 1/2″ (15 NB) To 48″ (1200NB) |
| Supporting Flange Material: | Gasket, Ring Joint, Flange Bolts |
| Machining Equipment: | Electric bevelling machine, Bending machine, Press machine, Pushing Machine, Sand-blasting machine etc |
| Standards : | MSS SP44 Flange, EN-1092 Flange, BS10 Flange, ASME B16.38 Flange, UNI Flange, PN Flange, ISO Flange, JIS Flange, ASME B16.47 (Series A, Series B) Flange, ASME B16.5 Flange, AWWA Flange, DIN Flange, GOST Flange |
| Pressure Rating Table: | Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS |
| Production Process: | Forged, Heat Treated and Machined |
| Application: | Fabrication Industry Natural Gas Industry Water Pipeline Industry Oil And Gas Industry Chemical Industry Nuclear Power Plant |
| Common Types of Flanges Dimensions: | Class 150 RTJ Flanges 300 LB WNRF Class 900 SORF 1500# BLRF Class 2500 BLRF |
| Connect Type Type: | RTJ, SMF, LJF, LMF, RF, FF |
| Design For Size: | ANSI, ASME, EN, ASA, PN, JIS, DIN, BS |
API 2000 PSI Flange Dimensions
| Flanges for Wellhead and Christmas Tree Equipment Weld Neck, Integral, Blinds, Targets and Test Blinds-Pressure Ratings |
|||
| Max Working Pressure |
2000 PSI |
3000 PSI |
5000 PSI |
| Test Pressure | 3000 PSI | 4500 PSI | 7500 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
| Integral, Blind, Target Blind and Test Flanges | |||
| Min. Yield | 60 000 PSI | 60 000 PSI | 60 000 PSI |
| Min. Tensile | 85 000 PSI | 85 000 PSI | 85 000 PSI |
| Material | API 60K | API 60K | API 60K |
| Weld Neck Flanges | |||
| Min. Yield | 45 000 PSI | 45 000 PSI | 45 000 PSI |
| Min. Tensile | 70 000 PSI | 70 000 PSI | 70 000 PSI |
| Material | API 45K | API 45K | API 45K |
| Flanges for Wellhead and Christmas Tree Equipment Weld Neck, Integral, Blinds, Targets and Test Blinds-Pressure Ratings |
|||
| Max Working Pressure |
10 000 PSI |
15 000 PSI |
20 000 PSI |
| Test Pressure | 15 000 PSI | 22 500 PSI | 30 000 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
| Integral, Blind, Target Blind and Test Flanges | |||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
| Weld Neck Flanges | |||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
API 3000 PSI Flange Dimensions
|
Flanges for Wellhead and Christmas Tree Equipment |
|||
| Max Working Pressure |
2000 PSI |
3000 PSI |
5000 PSI |
| Test Pressure | 3000 PSI | 4500 PSI | 7500 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
|
Integral, Blind, Target Blind and Test Flanges |
|||
| Min. Yield | 60 000 PSI | 60 000 PSI | 60 000 PSI |
| Min. Tensile | 85 000 PSI | 85 000 PSI | 85 000 PSI |
| Material | API 60K | API 60K | API 60K |
|
Weld Neck Flanges |
|||
| Min. Yield | 45 000 PSI | 45 000 PSI | 45 000 PSI |
| Min. Tensile | 70 000 PSI | 70 000 PSI | 70 000 PSI |
| Material | API 45K | API 45K | API 45K |
|
Flanges for Wellhead and Christmas Tree Equipment |
|||
| Max Working Pressure |
10 000 PSI |
15 000 PSI |
20 000 PSI |
| Test Pressure | 15 000 PSI | 22 500 PSI | 30 000 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
|
Integral, Blind, Target Blind and Test Flanges |
|||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
|
Weld Neck Flanges |
|||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
API 5000 PSI Flange Dimensions
|
Flanges for Wellhead and Christmas Tree Equipment |
|||
| Max Working Pressure |
2000 PSI |
3000 PSI |
5000 PSI |
| Test Pressure | 3000 PSI | 4500 PSI | 7500 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
|
Integral, Blind, Target Blind and Test Flanges |
|||
| Min. Yield | 60 000 PSI | 60 000 PSI | 60 000 PSI |
| Min. Tensile | 85 000 PSI | 85 000 PSI | 85 000 PSI |
| Material | API 60K | API 60K | API 60K |
|
Weld Neck Flanges |
|||
| Min. Yield | 45 000 PSI | 45 000 PSI | 45 000 PSI |
| Min. Tensile | 70 000 PSI | 70 000 PSI | 70 000 PSI |
| Material | API 45K | API 45K | API 45K |
|
Flanges for Wellhead and Christmas Tree Equipment |
|||
| Max Working Pressure |
10 000 PSI |
15 000 PSI |
20 000 PSI |
| Test Pressure | 15 000 PSI | 22 500 PSI | 30 000 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
|
Integral, Blind, Target Blind and Test Flanges |
|||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
|
Weld Neck Flanges |
|||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
API 20000 PSI Flange Dimensions
|
Flanges for Wellhead and Christmas Tree Equipment |
|||
| Max Working Pressure |
2000 PSI |
3000 PSI |
5000 PSI |
| Test Pressure | 3000 PSI | 4500 PSI | 7500 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
|
Integral, Blind, Target Blind and Test Flanges |
|||
| Min. Yield | 60 000 PSI | 60 000 PSI | 60 000 PSI |
| Min. Tensile | 85 000 PSI | 85 000 PSI | 85 000 PSI |
| Material | API 60K | API 60K | API 60K |
|
Weld Neck Flanges |
|||
| Min. Yield | 45 000 PSI | 45 000 PSI | 45 000 PSI |
| Min. Tensile | 70 000 PSI | 70 000 PSI | 70 000 PSI |
| Material | API 45K | API 45K | API 45K |
|
Flanges for Wellhead and Christmas Tree Equipment |
|||
| Max Working Pressure |
10 000 PSI |
15 000 PSI |
20 000 PSI |
| Test Pressure | 15 000 PSI | 22 500 PSI | 30 000 PSI |
| Product Spec Levels |
1, 2, 3 and 4 | 1, 2, 3 and 4 | 1, 2, 3 and 4 |
| API Temp Rating |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
K (-60 ° C) to Y (+345 ° C) |
|
Integral, Blind, Target Blind and Test Flanges |
|||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
|
Weld Neck Flanges |
|||
| Min. Yield | 60 000 PSI | 75 000 PSI | 75 000 PSI |
| Min. Tensile | 85 000 PSI | 95 000 PSI | 95 000 PSI |
| Material | API 60K | API 75K | API 75K |
Flange Section Integral Flange
| Nominal Size and Bore |
Max Bore |
Out Side Dia |
Tolerance | Max Chamfer |
| B | D | D | C | |
| 2000 PSI | ||||
| 26¾ | 26.78 | 41 | ± 0.12 | 0.25 |
| 30 | 30.03 | 44.19 | ± 0.12 | 0.25 |
| 3000 PSI | ||||
| 26¾ | 26.78 | 43.38 | ± 0.12 | 0.25 |
| 30 | 30.03 | 46.68 | ± 0.12 | 0.25 |
| 5000 PSI | ||||
| 13.3/8 | 13.66 | 26.5 | ± 0.12 | 0.25 |
| 16¾ | 16.78 | 30.38 | ± 0.12 | 0.25 |
| 18¾ | 18.78 | 35.62 | ± 0.12 | 0.25 |
| 21¾ | 21.28 | 39 | ± 0.12 | 0.25 |
| 10000 PSI | ||||
| 1.13/16 | 1.84 | 7.38 | ± 0.06 | 0.12 |
| 2.1/16 | 2.09 | 7.88 | ± 0.06 | 0.12 |
| 2.9/16 | 2.59 | 9.12 | ± 0.06 | 0.12 |
| 3.1/16 | 3.09 | 10.62 | ± 0.06 | 0.12 |
| 4.1/16 | 4.09 | 12.44 | ± 0.06 | 0.12 |
| 5.1/8 | 5.16 | 14.06 | ± 0.06 | 0.12 |
| 7.1/16 | 7.09 | 18.88 | ± 0.12 | 0.25 |
| 9 | 9.03 | 21.75 | ± 0.12 | 0.25 |
| 11 | 11.03 | 25.75 | ± 0.12 | 0.25 |
| 13.5/8 | 13.66 | 30.25 | ± 0.12 | 0.25 |
| 16¾ | 16.78 | 34.31 | ± 0.12 | 0.25 |
| 18¾ | 18.78 | 40.94 | ± 0.12 | 0.25 |
| 21¼ | 21.28 | 45 | ± 0.12 | 0.25 |
| 15000 PSI | ||||
| 1.13/16 | 1.84 | 8.19 | ± 0.06 | 0.12 |
| 2.1/16 | 2.09 | 8.75 | ± 0.06 | 0.12 |
| 2.9/16 | 2.59 | 10 | ± 0.06 | 0.12 |
| 3.1/16 | 3.09 | 11.31 | ± 0.06 | 0.12 |
| 4.1/16 | 4.09 | 14.19 | ± 0.06 | 0.12 |
| 5.1/8 | 5.16 | 16.5 | ± 0.06 | 0.12 |
| 7.1/16 | 7.09 | 19.88 | ± 0.12 | 0.25 |
| 9 | 9.03 | 25.5 | ± 0.12 | 0.25 |
| 11 | 11.03 | 32 | ± 0.12 | 0.25 |
| 13.5/8 | 13.66 | 34.88 | ± 0.12 | 0.25 |
| 18¾ | 18.78 | 45.75 | ± 0.12 | 0.25 |
| 20000 PSI | ||||
| 1.13/16 | 1.84 | 10.12 | ± 0.06 | 0.12 |
| 2.1/16 | 2.09 | 11.31 | ± 0.06 | 0.12 |
| 2.9/16 | 2.59 | 12.81 | ± 0.06 | 0.12 |
| 3.1/16 | 3.09 | 14.06 | ± 0.06 | 0.12 |
| 4.1/16 | 4.09 | 17.56 | ± 0.06 | 0.12 |
| 7.1/16 | 7.09 | 25.81 | ± 0.12 | 0.25 |
| 9 | 9.03 | 31.69 | ± 0.12 | 0.25 |
| 11 | 11.03 | 34.75 | ± 0.12 | 0.25 |
| 13.5/8 | 13.66 | 45.75 | ± 0.12 | 0.25 |
| Nominal Size and Bore |
Dia Raised Face |
Total THK |
Large Dia Hub |
Small Dia Hub |
| F | T | A | E | |
| 2000 PSI | ||||
| 26¾ | 31.69 | 4.97 | 32.91 | 29.25 |
| 30 | 35.75 | 5.28 | 36.69 | 32.8 |
| 3000 PSI | ||||
| 26¾ | 32.75 | 6.34 | 34.25 | 30.56 |
| 30 | 36.31 | 6.58 | 38.19 | 34.3 |
| 5000 PSI | ||||
| 13.3/8 | 18 | 4.44 | 18.94 | 16.69 |
| 16¾ | 21.06 | 5.13 | 21.88 | 20.75 |
| 18¾ | 24.69 | 6.53 | 26.56 | 23.56 |
| 21¾ | 27.62 | 7.12 | 29.88 | 26.75 |
| 10000 PSI | ||||
| 1.13/16 | 4.12 | 1.66 | 3.5 | 2.56 |
| 2.1/16 | 4.38 | 1.73 | 3.94 | 2.94 |
| 2.9/16 | 5.19 | 2.02 | 4.75 | 3.62 |
| 3.1/16 | 6 | 2.3 | 5.59 | 4.34 |
| 4.1/16 | 7.28 | 2.77 | 7.19 | 5.75 |
| 5.1/8 | 8.69 | 3.12 | 8.81 | 7.19 |
| 7.1/16 | 11.88 | 4.06 | 11.88 | 10 |
| 9 | 14.12 | 4.88 | 14.75 | 12.88 |
| 11 | 16.88 | 5.56 | 17.75 | 15.75 |
| 13.5/8 | 20.38 | 6.62 | 21.75 | 19.5 |
| 16¾ | 22.69 | 6.62 | 25.81 | 23.69 |
| 18¾ | 27.44 | 8.78 | 29.62 | 26.56 |
| 21¼ | 30.75 | 9.5 | 33.38 | 30 |
| 15000 PSI | ||||
| 1.13/16 | 4.19 | 1.78 | 3.84 | 2.81 |
| 2.1/16 | 4.5 | 2 | 4.38 | 3.25 |
| 2.9/16 | 5.25 | 2.25 | 5.06 | 3.94 |
| 3.1/16 | 6.06 | 2.53 | 6.06 | 4.81 |
| 4.1/16 | 7.62 | 3.09 | 7.69 | 6.25 |
| 5.1/8 | 8.88 | 3.88 | 9.62 | 7.88 |
| 7.1/16 | 12 | 4.6 | 12.81 | 10.88 |
| 9 | 15 | 5.75 | 17 | 13.75 |
| 11 | 17.88 | 7.38 | 23 | 16.81 |
| 13.5/8 | 21.31 | 8.06 | 23.44 | 20.81 |
| 18¾ | 28.44 | 10.06 | 32 | 28.75 |
| 20000 PSI | ||||
| 1.13/16 | 4.62 | 2.5 | 5.25 | 4.31 |
| 2.1/16 | 5.19 | 2.81 | 6.06 | 5 |
| 2.9/16 | 5.94 | 3.12 | 6.81 | 5.69 |
| 3.1/16 | 6.75 | 3.38 | 7.56 | 6.31 |
| 4.1/16 | 8.62 | 4.19 | 9.56 | 8.12 |
| 7.1/16 | 13.88 | 6.5 | 15.19 | 13.31 |
| 9 | 17.38 | 8.06 | 18.94 | 16.88 |
| 11 | 19.88 | 8.81 | 22.31 | 20 |
| 13.5/8 | 24.19 | 11.5 | 27.31 | 24.75 |
| Length Hub |
Radius Hub |
Dia Bolt Circle |
No of Bolts |
Dia Bolts |
|
| L | R | P | |||
| 2000 PSI | |||||
| 26¾ | 7.31 | 0.62 | 37.5 | 20 | 1¾ |
| 30 | 7.75 | 0.62 | 40.94 | 32 | 1.5/8 |
| 3000 PSI | |||||
| 26¾ | 7.31 | 0.62 | 39.38 | 24 | 2 |
| 30 | 7.75 | 0.62 | 42.94 | 32 | 1.7/8 |
| 5000 PSI | |||||
| 13.3/8 | 4.5 | 0.62 | 23.25 | 16 | 1.5/8 |
| 16¾ | 3 | 0.75 | 26.62 | 16 | 1.7/8 |
| 18¾ | 6 | 0.62 | 31.62 | 20 | 2 |
| 21¾ | 6.5 | 0.69 | 34.88 | 24 | 2 |
| 10000 PSI | |||||
| 1.13/16 | 1.91 | 0.38 | 5.75 | 8 | 3/4 |
| 2.1/16 | 2.03 | 0.38 | 6.25 | 8 | 3/4 |
| 2.9/16 | 2.25 | 0.38 | 7.25 | 8 | 7/8 |
| 3.1/16 | 2.5 | 0.38 | 8.5 | 8 | 1 |
| 4.1/16 | 2.88 | 0.38 | 10.19 | 8 | 1.1/8 |
| 5.1/8 | 3.19 | 0.38 | 11.81 | 12 | 1.1/8 |
| 7.1/16 | 3.75 | 0.62 | 15.88 | 12 | 1½ |
| 9 | 3.69 | 0.62 | 18.75 | 16 | 1½ |
| 11 | 4.06 | 0.62 | 22.25 | 16 | 1¾ |
| 13.5/8 | 4.5 | 0.62 | 26.5 | 20 | 1.7/8 |
| 16¾ | 3 | 0.75 | 30.56 | 24 | 1.7/8 |
| 18¾ | 6.12 | 0.62 | 36.44 | 24 | 2¼ |
| 21¼ | 6.5 | 0.81 | 40.25 | 24 | 2½ |
| 15000 PSI | |||||
| 1.13/16 | 1.88 | 0.38 | 6.31 | 8 | 7/8 |
| 2.1/16 | 2.12 | 0.38 | 6.88 | 8 | 7/8 |
| 2.9/16 | 2.25 | 0.38 | 7.88 | 8 | 1 |
| 3.1/16 | 2.5 | 0.38 | 9.06 | 8 | 1.1/8 |
| 4.1/16 | 2.88 | 0.38 | 11.44 | 8 | 1.3/8 |
| 5.1/8 | 3.22 | 0.62 | 13.5 | 12 | 1½ |
| 7.1/16 | 2.62 | 0.62 | 16.88 | 16 | 1½ |
| 9 | 4.88 | 0.62 | 21.75 | 16 | 1.7/8 |
| 11 | 9.28 | 0.62 | 28 | 20 | 2 |
| 13.5/8 | 4.5 | 1 | 30.38 | 20 | 2¼ |
| 18¾ | 6.12 | 1 | 40 | 20 | 3 |
| 20000 PSI | |||||
| 1.13/16 | 1.94 | 0.38 | 8 | 8 | 1 |
| 2.1/16 | 2.06 | 0.38 | 9.06 | 8 | 1.1/8 |
| 2.9/16 | 2.31 | 0.38 | 10.31 | 8 | 1¼ |
| 3.1/16 | 2.5 | 0.38 | 11.31 | 8 | 1.3/8 |
| 4.1/16 | 2.88 | 0.38 | 14.06 | 8 | 1¾ |
| 7.1/16 | 3.81 | 0.62 | 21.81 | 16 | 2 |
| 9 | 4.25 | 1 | 27 | 16 | 2½ |
| 11 | 4.06 | 1 | 29.5 | 16 | 2¾ |
| 13.5/8 | 5.25 | 1 | 40 | 20 | 3 |
| Dia Bolt Holes |
Bolt Hole Tolerance |
Length Bolts |
Ring No (R or RX) |
|
| 2000 PSI | ||||
| 26¾ | 1.88 | +0.09 | 13.75 | 167 |
| 30 | 1.75 | +0.09 | 14.25 | 303 |
| 3000 PSI | ||||
| 26¾ | 2.12 | +0.09 | 17 | 168 |
| 30 | 2 | +0.09 | 17.75 | 303 |
| 5000 PSI | ||||
| 13.3/8 | 1.75 | +0.09 | 12.5 | 160 |
| 16¾ | 2 | +0.09 | 14.5 | 162 |
| 18¾ | 2.12 | +0.09 | 17.5 | 163 |
| 21¾ | 2.12 | +0.09 | 18.75 | 165 |
| 10000 PSI | ||||
| 1.13/16 | 0.88 | +0.06 | 5 | 151 |
| 2.1/16 | 0.88 | +0.06 | 5.2 | 152 |
| 2.9/16 | 1 | +0.06 | 6 | 153 |
| 3.1/16 | 1.12 | +0.06 | 6.75 | 154 |
| 4.1/16 | 1.25 | +0.06 | 8 | 155 |
| 5.1/8 | 1.25 | +0.06 | 8.75 | 169 |
| 7.1/16 | 1.62 | +0.09 | 11.25 | 156 |
| 9 | 1.62 | +0.09 | 13 | 157 |
| 11 | 1.88 | +0.09 | 15 | 158 |
| 13.5/8 | 2 | +0.09 | 17.25 | 159 |
| 16¾ | 2 | +0.09 | 17.5 | 162 |
| 18¾ | 2.38 | +0.09 | 22.5 | 164 |
| 21¼ | 2.62 | +0.09 | 24.5 | 166 |
| 15000 PSI | ||||
| 1.13/16 | 1 | +0.06 | 5.5 | 151 |
| 2.1/16 | 1 | +0.06 | 6 | 152 |
| 2.9/16 | 1.12 | +0.06 | 6.75 | 153 |
| 3.1/16 | 1.25 | +0.06 | 7.5 | 154 |
| 4.1/16 | 1.5 | +0.06 | 9.25 | 155 |
| 5.1/8 | 1.62 | +0.09 | 11.5 | 169 |
| 7.1/16 | 1.62 | +0.09 | 12.75 | 156 |
| 9 | 2 | +0.09 | 15.75 | 157 |
| 11 | 2.12 | +0.09 | 19.25 | 158 |
| 13.5/8 | 2.38 | +0.09 | 21.25 | 159 |
| 18¾ | 3.12 | +0.12 | 26.75 | 164 |
| 20000 PSI | ||||
| 1.13/16 | 1.12 | +0.06 | 7.5 | 151 |
| 2.1/16 | 1.25 | +0.06 | 8.25 | 152 |
| 2.9/16 | 1.38 | +0.06 | 9.25 | 153 |
| 3.1/16 | 1.5 | +0.06 | 10 | 154 |
| 4.1/16 | 1.88 | +0.09 | 12.25 | 155 |
| 7.1/16 | 2.12 | +0.09 | 17.5 | 156 |
| 9 | 2.62 | +0.09 | 22.38 | 157 |
| 11 | 2.88 | +0.09 | 23.75 | 158 |
| 13.5/8 | 3.12 | +0.12 | 30 | 159 |
Flanges we Manufacture, Export & Supply
ANSI Flanges
ASME Flanges
AWWA Flanges
ORIFICE Flanges
API 6A/6B Flanges
Spectacle Blind & Spade Flanges
Baffle Plates
BLEED / DRIP Rings
Tube Sheets
